These are the basic steps needed to ensure a SUCCESSFUL AND SAFE Bed Bug Heat treatment. Thorough preparation and attention to the below details will positively affect your treatments success.
Before The Convectex Heat Treatment Can Commence
- Do not use any pesticide bombs, foggers, sprays, dusts prior to heat treatment. Repellent insecticides severely diminish the effectiveness of the treatment effort by driving bed bugs in to hard to treat areas such as under carpet pads and wall voids
- Do not remove any thing from treatment area except for items in sealed garbage to be permanently removed.
- Furniture and clutter must be pulled away from walls at least 4 inches.
- Unplug all electronics except major appliances
- Any items (clothing, shoes, bags, valuables) taken out with occupant on day off heat treatment must be thoroughly inspected and/or sanitized before being reintroduced to treated area.
- Permanently dispose of all trash and unwanted items before treatment.
Completely remove litter boxes from the treatment area if present
- Vacuum or sweep up dust/pet hair as they are hazardous to our equipment and personnel.
Improperly secured pictures and posters that may blow down should be taken down and laid flat.
- Take down, disinfect and remove vinyl or faux wood blinds have a low heat tolerance.
- High power fans are used during this process; loose papers should be secured or weighted down. Heat sensitive items should be clearly labeled and left inside the treatment area.
- Remove all pets and house plants (including fish aquariums).
- Remove fresh, meltable, and or perishable food
- Remove or place prescription / over the counter drugs or vitamins in the refrigerator
- Remove cosmetics
- Remove candles
- Remove all pressurized items – lighters, hairspray, fire extinguishers etc.
- Remove all flammables – fuel, alcohols, solvents, etc.
- Remove wooden and stringed instruments – cases should remain in the treatment
- Family heirlooms and irreplaceable items should be inspected and a determination made as to whether they should remain in the treatment area
- Bed bugs will often seek shelter within or under piles of clothing. Piles of clothing should be either hung up on hangers or spread out before the heat treatment commences.
- Wash bedding and washable excess clutter on high heat followed with a high heat dry cycle. After drying, remove and immediately place the clothing in a heavy duty garbage bag and seal the bag by twisting the excess bag and wrapping the twist with tape. Think "Loaf of Bread"
- Open all drawers and unpack any overly packed areas. Remember... Air flow is key!
- Large blankets and comforters can be draped over interior doors to limit bed bug harborage and improve effectiveness.
* Air flow is critical to this process, over-packed closets and rooms may not be able to be treated properly!
CLUTTER IS A BED BUGS BEST FRIEND!
Watch Our Heat Prep Video
Try Our Pre-Made Form